NCP361SNT1G The NCP361 disco
nnects systems at its output when wrong VBUS
operating conditions are detected at its input. The system is positive
over−voltage protected up to +20 V.
Thanks to an integrated PMOS FET, no external device is necessary,
reducing the system cost and the PCB area of the application board.
The NCP361 is able to instantaneously disconnect the output from the input
if the input voltage exceeds the overvoltage threshold(5.675 V).
Thanks to an overcurrent protection, the integrated PMOS is turning off when
the charge current exceeds current limit (see options in ordering information).
The NCP361 provides a negative going flag (FLAG) output, which
alerts the system that voltage, current or overtemperature faults have
occurred.In addition, the device has ESD−protected input (15 kV Air)
when bypassed with a 1 F or larger capacitor.
該NCP361斷開系統在其輸出端時錯誤VBUS操作條件在其輸入端檢測到。
該系統為正過電壓保護高達+ 20V由于集成FET PMOS，無需外部設備是必要的，
降低了系統成本和應用板的PCB面積。該NCP361能夠瞬間斷開輸入輸出，
如果輸入電壓超過過壓閾值（5.675 V）。由于過電流保護，
集成PMOS被關閉時的充電電流超過電流限制（見訂購信息選項）。
在NCP361提供一個負向位（FLAG）的輸出，這提醒系統，電壓，電流或過熱有故障發生。
另外，該裝置具有ESD保護的輸入（15千伏空氣）時，用1→F或更大的電容旁路
